Displaying 1-100 of 110 Page  1 2  |
| Item ID |
Short Description |
Product Type / Details |
#
|
Price |
Note |
Location |
| Make |
Model |
| |
|
$ |
|
 |
123867 |
Hyster |
N45XMR3 |
in Forklifts and Accessories
|
4
|
|
|
|
Chester, VA |
| |
(4) Hyster 45 Reach Trucks (4) Hyster 45 Reach Trucks, Model N45XMR3: Serial numbers: G138N02045B, G138N02055B, G138N02056B, G138N02057B ... 36 volt, 4500 lbs lift, side shift. approx. 5 years old. each comes with a battery and charger. |
|
123154 |
Lorain Power Product |
LRT-18U |
in Crawler-Mounted Cranes
|
1
|
|
|
 |
Houston, TX |
| |
18 Ton Lorain LRT-18U Crane (Baton Rouge, LA) Lorain 18-Ton Crane
• Model – LRT-18U
• S/N – 36156
• MFG Year – 1975
• Hours – No Hour Meter
• Boom – 3 Section
• Minimum Boom Length – 30 ft
• Maximum Boom Length – 72 ft
• Lifting Capacity – 36,000 lbs at 30 ft.
• Minimum Boom Angle - 0°
• Maximum Boom Angle - 70°
• Engine – Standard GMC 4-53N Diesel
• Cylinders – 4
• Bore and Stroke – 3 7/8” x 4 ½”
• Net HP – 140HP @ 2800 RPM
• Battery – 12V
• Fuel Tank – 40 Gallon
• Cooling System – 7 Gallon
• Crankcase Capacity – 4 Gallon
• Dimensions – 96”W x 17’11” L
• Wheelbase – 108
• Winch only goes up and the cable is cut and needs to be replaced.
• The pump that supplies the winch is not working properly.
• The out riggers work but need some minor repair on the electrical parts.
• Engine runs , but needs a new battery.
• There is a seal leaking on the transmission.
• Left rear tire is flat.
• The boom will go down for transport.
• Last operational date is the summer of 2009.
• Out of service because the pump supplying the cable is not allowing the cable to come down.
• Original manuals for the crane are available.
Payment for equipment will be collected at 100%.
• MMR will load the crane for the buyer.
• Equipment is SOLD as is WHERE is.
• Buyer will be responsible for trucking.
• Buyer will be responsible for any demurrage fees.
Rules before Bidding:
1. You do not have to register to bid on this material.
2. Just print the bidders page found below and fax it to 262-313-4453. -OR- you can click above on "BID NOW for this item"
3. You can send an e-mail and Reference the Acct# TCB-10-001 18 Ton Lorain Crane to jeffr@materialmg.com
4. MMR recommends you view the equipment before bidding.
5. Please ask our friendly staff any questions you have.
|
|
91557 |
FN Smith |
1731107 |
in Conveyors
|
1
|
|
2,500.00
|
|
St. Louis, MO |
| |
18" wide x 15'-4" long S/S Retracting Belt Conveyor On legs - 54" TOB high end - 47" TOB low end (inclined)- not skidded. |
|
90710 |
Unknown |
Rabbit Ear |
in Conveyors
|
1
|
|
2,000.00
|
|
St. Louis, MO |
| |
18" Wide x 8-1/2' Long Rabbit Ear Belt Conveyor 31" Overall width x 3' high - with stainless steel frame - less drive |
|
118489 |
2-ton mobile crane with hoist |
in Lifters and Hoists
|
1
|
|
|
F* |
Florence, SC |
| |
2-ton mobile crane with hoist 2-ton mobile crane with hoist
(available October 2010) |
|
98172 |
A. O. Smith Engineer |
|
in Materials Handling and Storage Equipment
|
1
|
|
|
F* |
St. Louis, MO |
| |
A.O. Smith Engineered Storage Silo 21.539' Nominal inside diameter x 56.42' Nominal eave height - approximate straight wall storage height 40' - S.O. #01081 - Compacted density 48 PCF - Designed for mass flow loads. Pressure: 2.0 oz/sq. in. - Vacuum: 0.5 oz/sq. in. With cone bottom, 50 degree angle, 12" diameter outlet. Bolted carbon steel. Wall thickness varies with each row of sections (from top to bottom), as follows: 12 GA, 10 GA, 9 GA, 8 GA, 3/16PL, 3/16PL, 3/16PL. Walls of the silo unbolt into 8' vertical x 5' horizontal sections. |
|
98571 |
Allen |
10420 |
in Conveyors
|
1
|
|
3,000.00
|
|
St. Louis, MO |
| |
Allen Vibratory Conveyor Model #10420 - mild iron base - with 1/2 HP Reliance motor, 1725 RPM, 230/460 volt |
|
124046 |
Bag Settling Conveyor - - Available early Sept 2010 |
in Conveyors
|
1
|
|
1,500.00
|
|
St. Louis, MO |
| |
Bag Settling Conveyor - - Available early Sept 2010 20" wide belt x 16' long (24" OAW) |
|
124263 |
Barlow |
|
in Conveyors
|
1
|
|
|
F* |
St. Louis, MO |
| |
Barlow Packaging Dual Lane Infeed Conveyor System Speed: 75'/min. - with 1/2 HP constant speed Eurodrive - underslung drive configuration - UHMW wearstrips - stationary outer guiderail brackets (7" fixed opening) - Barlow style 2" high aluminum guiderail - adjustable levelling feet - elevation = 33", +/- 3" Dual 6" wide "S" conveyor, speed = 83'/min - (2) 1-1/2 HP constant speed Eurodrives - Mild steel construction. |
|
122261 |
Battery Charger for Fork Trucks - Exide System 3000 |
in Materials Handling and Storage Equipment
|
1
|
|
|
|
Circleville, OH |
| |
Battery Charger for Fork Trucks - Exide System 3000 Battery Charger for Fork Trucks - Exide System 3000 - type g battery Type - L-A, 18 cell, manufacturer # C3-18-9606, Inpot Volts, 208/240/480, input amps 28/24/12, 3 phase, 60 hz, DC output 36 volts, 216 amps, looks to be uused |
|
96461 |
Boss |
M40D |
in Forklifts and Accessories
|
...
|
|
1,000.00
|
 |
Edgewater, NJ |
| |
Boss, Forktruck Caterpillar Model M40d, 1989 |
|
123996 |
Shep-Niles |
|
in Fixed Position Cranes
|
1
|
|
|
|
Orange, TX |
| |
Bridge Crane Top running bridge for 40#rail 16'-8" wheel span on bridge;; Top running trolley package w/15 ton main and 5 ton aux hoist. |
|
116112 |
Bridge Crane with Yale hoist - 2-ton |
in Fixed Position Cranes
|
1
|
|
|
|
Florence, SC |
| |
Bridge Crane with Yale hoist - 2-ton 2-ton Sveda Bridge Crane with Yale hoist
(Available October 2010) |
|
110399 |
AC Horn |
|
in Conveyors
|
1
|
|
8,800.00
|
|
St. Louis, MO |
| |
Bucket elevator AC Horn Bucket elevator, AC Horn, 1995, discharge height 13 feet - fill area 48 inches, reach of 48 inches, 498 cu.ft/hr. All stainless steel tubular structure, USDA materials and methods of construction. |
|
121822 |
Budgit |
Portable Crane |
in Materials Handling and Storage Equipment
|
1
|
|
3,000.00
|
F* |
St. Louis, MO |
| |
Budgit 5 Ton Crane 5 ton portable crane. 26 ft span. Weight approx 7400lbs. 18' tall when assembled. |
|
121593 |
C&D Robotics, Inc. |
CG-500 |
in Materials Handling and Storage Equipment
|
1
|
|
|
|
Beaumont, TX |
| |
C&D Robotic Palletizer, Model CG-500 9,900 lb/hr with 55-lb (25kg) bags 3-axis robot-paper & plastic bags-any pattern or size on pallet or inside box. Current 40 bags in eight 5 bags/layers placed inside 46" tall box on 49"x41"pallet Robot can handle cartons or boxes. |
|
93064 |
Caterpillar |
M40D |
in Forklifts and Accessories
|
1
|
|
1,000.00
|
|
St. Louis, MO |
| |
Caterpillar, Forktruck Caterpillar Model M40d, 1989 |
|
121022 |
Clark Hand Walker Lifter - Forklift - Model P6CF |
in Forklifts and Accessories
|
1
|
|
|
|
Philadelphia, PA |
| |
Clark Hand Walker Lifter - Forklift - Model P6CF Clark Hand Walker Lifter - Forklift, Model P6CF, s/n P465-0183-8112FB, 6000lb lifting capacity 24v, 5709 hours. |
|
123313 |
Columbia |
STD/LTS/PD-460/002 |
in Materials Handling and Storage Equipment
|
1
|
|
24,000.00
|
|
St. Louis, MO |
| |
Columbia Pallet Transfer Removed in working condition. |
|
110474 |
Commercial Mfg Supp |
Incline Conveyor |
in Conveyors
|
1
|
|
5,000.00
|
F* |
St. Louis, MO |
| |
Commercial Mfg supply co Incline conveyor Commercial Mfg supply co Incline conveyor, Interlox approx W 13' - 14' (330 - 356 mm) x L 15' (4'570 mm) |
|
91580 |
Conveyor Plus |
|
in Conveyors
|
1
|
|
600.00
|
|
St. Louis, MO |
| |
Conveyor Plus (CPI) 24" wide 4' long Stainless Steel Conveyor Unit ID #673-1 - with 1/2 HP Drive, 1725 RPM |
|
91571 |
Conveyor Plus |
|
in Conveyors
|
1
|
|
10,000.00
|
F* |
St. Louis, MO |
| |
Conveyor Plus Bag Knockdown Convyeyor, 12" wide x 13' long Bags will enter upright from the left and move toward the right with side gussets leading. The face panels of the bags will be facing you. The reciprocating kicker kicks the bottoms of the bags toward you. The bags will discharge toward you, lying flat on item #14212 (see photo).
The discharge end of #14212 is at a fixed elevation.
The entire flex-top conveyor (#14213 in photo) can be easily raised or lowered for various bag heights.
The kicker was originally electrically-actuated however it was converted to an air cylinder after installed.
|
|
111241 |
Cyclonaire HV-75 Bulk Conveyor System |
in Conveyors
|
1
|
|
|
|
Memphis, TN |
| |
Cyclonaire HV-75 Bulk Conveyor System Cyclonaire HV-75 Bulk Conveyor System, 8" inlet, 8" outlet cs, s/n HV-75-2659, vacuum hose adapter 8"x20' long, railpan 24"x42"-8" outlet alum., Yard trailer cs. volume cu. ft. 75, air inlet 8, material inlet 6, discharge 8, ~weight 1550. Overall Width: Outside of tire to Outside of tire = 88"
Height can be reduced approximately 8" if wheels are removed.
Height can be reduced approximately another 12" with the top piping connection removed.
The manhole cover for the tank is missing. Also some of the controller components are missing from the unit. More pdf files are available |
|
105161 |
Dalmac Manipulator - lift capacity 550 lbs |
in Lifters and Hoists
|
1
|
|
|
|
Richmond, VA |
| |
Dalmac Manipulator - lift capacity 550 lbs Dalmac Manipulator - lift capacity 550 lbs. Manufactured 1993. Registration # 9310076 |
|
90905 |
Eriez |
HD66 |
in Conveyors
|
1
|
|
6,500.00
|
F* |
St. Louis, MO |
| |
Eriez Hi-Vi Vibrating Pan Conveyor, 20" wide S/S Pan 20" wide x 67" long - less drive - 115 volt, 2.6 amp, 30 HZ |
|
95441 |
Eriez |
36C & HS26 |
in Feeders
|
4
|
|
10,250.00
|
F* |
St. Louis, MO |
| |
Eriez Vibratory Feeders - Pedal Control On/Off Capability Designed for feeding tablet type products
Multiple feeders feed from a 4.5 cu. ft. hopper. The first feeder is a model 36C that feeds to a HS26 which feeds to another HS26. Drawing attached. |
|
93133 |
Eriez |
HS 36 |
in Feeders
|
1
|
|
3,000.00
|
F* |
St. Louis, MO |
| |
Eriez, Vibratory Feed Hopper Eriez Vibratory FeederUsed to feed Chips, Nuts and other Small Items, Model HS 36 |
|
122418 |
exide |
LH3-24-1000 |
in Forklifts and Accessories
|
1
|
|
500.00
|
F* |
St. Louis, MO |
| |
Exide Battery Charger Load Hog - Serial # UC23781 - 24 cells - Type L-A - Battery A.H. 1000 - DC output = 160 amps, 48 volt, 60 Hz - Amps 46/40/20 - Volts 208/240/480 - Charge time 8 hrs. |
 |
120792 |
Explosion Proof Pallet Truck - 3 needed |
in Lifters and Hoists
|
3
|
|
|
F* |
Guarulhos, SP |
| |
Explosion Proof Pallet Truck - 3 needed Explosion Proof Pallet Truck, similar to Sichelschmidt model d-170-XP/ASM, electric walk behind pallet truck with load capicity: 7000 lb., Load centre distance: 600mm, Height, fork lowered: 85mm, Drive: Electric, Travel speed: 6 km/hr, Distance between fork arms: 670mm, Battery charger: 3-phase AC 380V or 1-phase AC 220V. Fork length: 1150mm, For use in classification area: Class 1, Division 1, Group D. (3) three wanted |
|
121656 |
FN Smith |
1975101 |
in Conveyors
|
1
|
|
32,500.00
|
|
St. Louis, MO |
| |
F N Smith "S" Conveyor Model 1975101, Serial # 0907-0133 - Comprised of two conveyor sections: "S" Conveyor section (flextop) uses 1 HP motor; straight section (metering belt) uses 1.5 HP motor - with carbon steel guides. Has (4) legs, each with an independent electric motor (2 of the legs are missing this motor). See attached drawing. |
|
115939 |
FN Smith |
|
in Conveyors
|
1
|
|
|
|
St. Louis, MO |
| |
F.N. Smith Belt Conveyor 12" wide belt x 5'-2" long x 4'-6" high |
|
115937 |
FN Smith |
|
in Conveyors
|
1
|
|
|
|
St. Louis, MO |
| |
F.N. Smith Belt Conveyor 12" wide belt x 5'-2" long x 4'-6" high |
|
110028 |
Twinlode |
Flow through racking |
in Warehouse Racking
|
1
|
|
30,000.00
|
F* |
St. Louis, MO |
| |
Flow Through Racking Dual Pallet positions Flow Through Racking Double Wide Pallet positions. 504 pallet position 12 pallets deep 14 pallets wide (7 double wide)full roller. 168 pallet positions per layer |
|
90760 |
FN Smith |
2075-0677 |
in Conveyors
|
1
|
|
2,000.00
|
F* |
St. Louis, MO |
| |
FN Smith 24" wide x 14' long SS Inclined Portable Belt Conveyor Stainless Steel portable belt conveyor with 1 HP motor/reducer. Belt is 21" wide (OAW 29") x 13'-6" long. Conveyor incline ranges from 30" to 37" |
|
91608 |
Fox Venturi |
|
in Conveyors
|
1
|
|
3,000.00
|
|
St. Louis, MO |
| |
Fox Venturi 8" x 10" Eductor Motive air: from P-D Blower - 1500 SCFM at 7-8 psig - Convey line size: 8" SCH 10 pipe. Motive: 4" male NPT - Suction: 10" 150 lb pattern - 1/2" thick plate flange - Discharge: 8" 150 lb pattern - 1/2" thick plate flange. |
|
91609 |
Fox Venturi |
|
in Conveyors
|
1
|
|
3,000.00
|
|
St. Louis, MO |
| |
Fox Venturi 8" x 10" Eductor Motive air: from P-D Blower - 1500 SCFM at 7-8 psig - Convey line size: 8" SCH 10 pipe. Motive: 4" male NPT - Suction: 10" 150 lb pattern - 1/2" thick plate flange - Discharge: 8" 150 lb pattern - 1/2" thick plate flange. |
|
114968 |
Pooley, Inc. |
|
in Roller Conveyors
|
1
|
|
6,000.00
|
|
St. Louis, MO |
| |
Full Pallet Conveyor Used to transport full pallets of finished product to warehouse. |
|
125075 |
Wyard Industries |
BDA-3200 |
in Materials Handling and Storage Equipment
|
1
|
|
19,500.00
|
|
St. Louis, MO |
| |
Glass Jar Depalletizer Empty Baby Food Bottles/Jars
|
|
102592 |
HK Systems |
Unknown |
in Materials Handling and Storage Equipment
|
1
|
|
7,000.00
|
F* |
St. Louis, MO |
| |
HK Systems Pallet Dispenser Designed to dispense 44" x 54" x 2" thick plastic slave pallets. Holds approx. (60) - stack accumulation area of 9'. Includes exit conveyor, 4' wide x 11' long. |
|
121032 |
Hyster Hand Held Lift Truck Model W40BL |
in Forklifts and Accessories
|
1
|
|
|
|
Philadelphia, PA |
| |
Hyster Hand Held Lift Truck Model W40BL Hyster Hand Held Lift Truck Model W40BL, s/n B135U05-102Z, 4000lb capacity, truck wt 2230, hours 1124 |
|
93232 |
Hyster |
E50B |
in Forklifts and Accessories
|
1
|
|
500.00
|
F* |
St. Louis, MO |
| |
Hyster, Fork Truck 36V DC |
|
93231 |
Hyster |
E50B |
in Forklifts and Accessories
|
1
|
|
1,500.00
|
|
St. Louis, MO |
| |
Hyster, Fork Truck 36 V DC |
|
91567 |
Hytrol |
190 ACC X 5 FT |
in Roller Conveyors
|
1
|
|
700.00
|
F* |
St. Louis, MO |
| |
Hytrol 45 degree Live Roller Conveyor, 19" wide rollers (22" OAW) x 5' long |
|
124047 |
Hytrol |
190-RB |
in Conveyors
|
1
|
|
1,500.00
|
|
St. Louis, MO |
| |
Hytrol Bag Flattening Conveyor - - Available early Sept 2010 18" wide belt x 12' long (20" OAW) |
|
115938 |
Hytrol |
|
in Conveyors
|
1
|
|
|
|
St. Louis, MO |
| |
Hytrol Portable Incline Belt Conveyor Height 2' on one end to 4' on other end - can convert to 8' high incline. |
|
117913 |
Incline Belt Conveyor - 12" wide belt (17" OAW) x 12' long |
in Conveyors
|
1
|
|
1,000.00
|
|
St. Louis, MO |
| |
Incline Belt Conveyor - 12" wide belt (17" OAW) x 12' long With 1/2 HP Boston Motor, 1725 RPM, 208/230/460 volt, 60 HZ. |
|
117914 |
Incline Belt Conveyor - 12" wide belt (17" OAW) x 12' long |
in Conveyors
|
1
|
|
1,000.00
|
|
St. Louis, MO |
| |
Incline Belt Conveyor - 12" wide belt (17" OAW) x 12' long With 1/2 HP Boston Motor, 1725 RPM, 208/230/460 volt, 60 HZ. |
|
113215 |
Portec |
25CS107 |
in Conveyors
|
1
|
|
6,000.00
|
|
St. Louis, MO |
| |
Inclined Portec Belt Conveyor, 21" wide belt x 111" long With Reliance 1/2 HP Motor, 1725 RPM. |
|
116012 |
Intralox |
|
in Conveyors
|
1
|
|
8,000.00
|
|
St. Louis, MO |
| |
Intralox Crossover Belt Conveyor With side guides. |
|
119821 |
Dorsey |
BOCIE S/T |
in Truck Trailers
|
1
|
|
|
|
Houston, TX |
| |
IRG-10-098 Lot F1 --- Sea Can Trailer (Baton Rouge, LA) Lot F1 - Dorsey Sea Can Trailer
MFG – Dorsey
Model – BOCIE S/T
MFG Date – 1972
VIN - 098343
Corrosion on Frame
|
|
91906 |
JanTec Inc |
PTM EHD 8654-90 |
in Conveyors
|
1
|
|
700.00
|
F* |
St. Louis, MO |
| |
JanTec 90 Degree Powered Belt Turn Conveyor for Pallets Wtih 5 HP drive, 230/460 volt and Tigear Right Angle Reducer. |
|
116222 |
Kamflex |
704 |
in Conveyors
|
1
|
|
5,000.00
|
|
St. Louis, MO |
| |
Kam-Flex Belt Conveyor Model 704, Serial Number 20081094 - Speed: 63 FPM |
|
118779 |
Kamflex |
704 |
in Conveyors
|
2
|
|
6,500.00
|
|
St. Louis, MO |
| |
Kam-Flex Belt Conveyors Model 704, Serial #20081093 & 20081094 (2 units available). Speed 63 FPM |
|
87166 |
Large Material Rack Five Level |
in Materials Handling and Storage Equipment
|
1
|
|
|
|
Wilmington, DE |
| |
Large Material Rack Five Level Large 5 level Material Racks, 74 3/4" wide, 30" deep, 8" height. Will not be available until Dec. 31st, 2007. |
|
118846 |
Litton Von Gal |
SPLX/PPD 4840 LH(F) REPD |
in Materials Handling and Storage Equipment
|
1
|
|
25,000.00
|
F* |
St. Louis, MO |
| |
Litton Von Gal Bundle Palletizer - mid-October 2010 Small bag bundle palletizer, Model SPLX/PPD 4840 LH (F) REPD, with slipsheet dispenser. |
|
125623 |
Lot of 1 meter Lattice Towers (Wood River, Il.) Ends 09/09/2010 |
in Lifters and Hoists
|
1
|
|
|
F*N* |
Kingwood, TX |
| |
Lot of 1 meter Lattice Towers (Wood River, Il.) Ends 09/09/2010 Contact Jon Daniels 281-348-0826
jon@cprpipe.com
Sold As Is Where Is
CPR Buyers are encouraged to view items at facility before placing bid!
FOB loaded truck
|
|
125625 |
Lot of 2 meter Lattice Towers (Wood River, Il) Ends 09/09/2010 |
in Lifters and Hoists
|
1
|
|
|
F*N* |
Kingwood, TX |
| |
Lot of 2 meter Lattice Towers (Wood River, Il) Ends 09/09/2010 Contact Jon Daniels 281-348-0826
jon@cprpipe.com
Sold As Is Where Is
CPR Buyers are encouraged to view items at facility before placing bid!
FOB loaded truck
|
|
125628 |
Lot of Concrete Barrel Stands (Woodriver, Ill) Ends 09/09/2010 |
in Lifters and Hoists
|
1
|
|
|
F*N* |
Kingwood, TX |
| |
Lot of Concrete Barrel Stands (Woodriver, Ill) Ends 09/09/2010 Contact Jon Daniels 281-348-0826
jon@cprpipe.com
Sold As Is Where Is
CPR Buyers are encouraged to view items at facility before placing bid!
FOB loaded truck
|
|
125629 |
Lot of Steel Spreader Mats (Woodriver, Ill) Ends 09/09/2010 |
in Lifters and Hoists
|
1
|
|
|
F*N* |
Kingwood, TX |
| |
Lot of Steel Spreader Mats (Woodriver, Ill) Ends 09/09/2010 7 - 16' 4" X 21" X 11", estimated weight 3000lbs each
4 - 4' X 16' X 12"
Contact Jon Daniels 281-348-0826
jon@cprpipe.com
Sold As Is Where Is
CPR Buyers are encouraged to view items at facility before placing bid!
FOB loaded truck
|
|
91177 |
Mac |
3'S/H |
in Materials Handling and Storage Equipment
|
1
|
|
1,200.00
|
F* |
St. Louis, MO |
| |
Mac Stainless Steel Hopper, 3' dia. Previously used with Quincy Vacuum System |
|
119022 |
Meyer & Sons |
|
in Conveyors
|
1
|
|
6,000.00
|
|
St. Louis, MO |
| |
Meyer & Sons Hinged plastic Belt Conveyor Discharge height 2'-9" - horizontal configuration. Main frame is T-304 stainless steel - With 6" high sidewalls, S/S bolt-on extension with neoprene skirt. Belt is 24" wide Habasit M2510 hinged plastic belt, 0% open flat top, white polypropylene with 3" side guides. With floor supports, side rails & Eurodrive washdown severe-duty helical bevel motor/reducer. |
|
122898 |
Palamatic Model 160 Vacuum Lifter with JIB |
in Lifters and Hoists
|
2
|
|
|
|
Memphis, TN |
| |
Palamatic Model 160 Vacuum Lifter with JIB Palamatic Model 160 Vacuum Lifter with JIB, age 12 years |
|
89159 |
Pallet Dispenser and chain conveyor for 42"x42" pallets |
in Warehouse Racking
|
1
|
|
|
|
Richmond, VA |
| |
Pallet Dispenser and chain conveyor for 42"x42" pallets Pallet stack is raised and lowered via air cylinders. After pallet stack has been raised past a set of stops (“dogs”), the stack is lowered and the dogs (one on each corner of the pallet) are rotated in (via air cylinders) to hold the second pallet and rest of the stack up as the bottom pallet is lowered onto a chain conveyor.
5’ long two strand chain conveyor, chain spacing of about 33”, for feeding the bottom pallet out of the dispenser. Top of chain elevation 42”.
Equipped with photo-eyes and proximity switches needed for operation, pre-wired to local junction box. Motor starter/VFD for conveyor and PLC for controlling pallet dispenser and chain conveyor not included.
|
|
124916 |
DiCor |
|
in Warehouse Racking
|
1
|
|
|
|
St. Louis, MO |
| |
Pallet Racking 8 Feet wide between posts - 66" clear space between levels. (2) extra uprights available to allow 14 columns to be broken into 3 separate runs. |
|
119908 |
Pneumatic Conveying |
|
in Conveyors
|
1
|
|
5,600.00
|
|
St. Louis, MO |
| |
Pneu-Con 24" Powder Vacuum Receiver 24" Diameter welded carbon steel vacuum receiver housing, (7) Filter Cartridges (77 sq. ft. filter area) - Pulse cleaning of filter cartridges, complete with solenoid valve and interconnecting wiring. Requires 5 scfm @ 80 psi of compressed air - Aluminum air plenum - carbon steel construction all product contact parts - Working capacity: 3 cu. ft. - 2.5" O.D. material inlet, sanitary design - 3" O.D. air exhaust stub - 60 degree cone - Flapper valve, high level for receiving hopper - Vent filter with stand-offs - 3" vacuum control valve, solenoid controlled, air operated.
|
|
119909 |
Pneumatic Conveying |
|
in Conveyors
|
1
|
|
5,600.00
|
|
St. Louis, MO |
| |
Pneu-Con 24" Powder Vacuum Receiver 24" Diameter welded carbon steel vacuum receiver housing, (7) Filter Cartridges (77 sq. ft. filter area) - Pulse cleaning of filter cartridges, complete with solenoid valve and interconnection wiring. Requires 5 scfm @ 80 psi of compressed air - Aluminum air plenum - carbon steel construction all product contact parts - Working capacity: 3 cu. ft. - 2.5" O.D. material inlet, sanitary design - 3" O.D. air exhaust stub - 60 degree cone - Flapper valve, high level for receiving hopper - Vent filter with stand-offs - 3" vacuum control valve, solenoid controlled, air operated. |
|
91591 |
Pneumatic Conveying |
|
in Conveyors
|
1
|
|
1,000.00
|
|
St. Louis, MO |
| |
Pneumatic Conveying 5 HP Blower Package Roots Model 36U-RAI, S/N 0406978368 - with 5 HP Baldor motor, 1750 RPM, 208-230/460 volt.
** NEVER USED ** |
|
115355 |
Portec |
B-3424-45 Deg |
in Conveyors
|
1
|
|
1,800.00
|
|
St. Louis, MO |
| |
Portec 45 degree belt turn Belt width 25-1/2" (29" OAW - 35" with drive) - 40" high (48" with skid) - 48" long (54" with skid) |
|
115356 |
Portec |
B-3424-45 Deg |
in Conveyors
|
1
|
|
1,800.00
|
|
St. Louis, MO |
| |
Portec 45 degree belt turn Belt width 25-1/2" (OAW 29" - with drive 35" wide) - 48" long (54" with skid) - 40" high (48" with skid) |
|
113603 |
Hytrol |
32B27-45 DEG |
in Conveyors
|
1
|
|
4,000.00
|
|
St. Louis, MO |
| |
Portec 45 degree Power Belt Curve 45 Degree Curve - Center Radius: 3'-9-1/2" - Belt Width: 27" - Belt Top Height: 17" - Adjustable Legs: +/- 2" - Belt Speed: 150 fpm - Shaft-mounted drive at outside radius of discharge |
|
91584 |
Portec |
24A23-54.5DEG |
in Conveyors
|
1
|
|
1,200.00
|
F* |
St. Louis, MO |
| |
Portec 45 Degree Power Curve - 26" wide belt With 1 HP Baldor Motor and Winsmith Reducer |
|
113214 |
Portec |
25CS54 |
in Conveyors
|
1
|
|
6,000.00
|
|
St. Louis, MO |
| |
Portec Belt Conveyor, 21" wide belt x 55" long With 1/2 HP Motor, 1725 RPM - OAW = 36" - Roller width 23" -40" OAH (on legs) |
|
92153 |
Premier |
|
in Conveyors
|
1
|
|
|
F* |
Elkton, MD |
| |
Premier Pnuematic Vacuum System -250 cfm Premier Pnuematic Vacuum System -250 cfm, contains (1)Roots blower series 2400 with 7.5 hp motor, 45 RAI and vertical discharge silencer, (1)PremierModular in-line Cartridge filter, aluminum, part# 5215-12,(1)Premier Filter receiver, carbon steel with epoxy lining, size 45in diameter x 96" high, single doors access, (1) cyclone, 14ga ss304 size 2, 13 in diameter x 39in high, still installed, nearly same system as item #94457, except for larger filter receiver |
|
94457 |
Premier |
|
in Conveyors
|
1
|
|
|
F* |
Elkton, MD |
| |
Premier Pnuematic Vacuum System -250 cfm Premier Pnuematic Vacuum System -250 cfm, contains (1)Roots blower series 2400 with 7.5 hp motor, 45 RAI and vertical discharge silencer, (1)PremierModular in-line Cartridge filter, aluminum, part# 5215-12,(1)Premier Filter receiver, carbon steel with epoxy lining, model F/R 8-18, single door access, (1) LH cyclone, 14ga ss304 size 2, 13 in diameter x 39in high, still installed - this system identical to item #92153 only difference is smaller filter receiver |
|
117614 |
Carbis Inc. |
3-1B-FYLH-126 and 3-1B-FYRH-126 |
in Materials Handling and Storage Equipment
|
1
|
|
|
|
Pass Christian, MS |
| |
Railcar Articulating Unloading Arms-UNUSED (8) Left Hand - Carbis Model 3-1B-FYLH-126
(8) Right Hand - Carbis Model 3-1B-FYRH-126 |
|
94574 |
Roach |
|
in Conveyors
|
1
|
|
5,000.00
|
F* |
St. Louis, MO |
| |
Roach Belt Conveyor with Hydraulic Lift Max load 2,500 lbs - axle load 900 lbs. - 16" x 96" table, 36" lift. Lowered height 8.5", raised 43". With 1.5 HP motor, 230/460 volt. Conveyor OAW = 20" - belt is 12" wide x 165" long |
|
90886 |
Schebler |
|
in Conveyors
|
1
|
|
500.00
|
F* |
St. Louis, MO |
| |
Schebler Curved Slide Gate for 17" dia U-Trough Screw Conveyor Set up for Linear Actuator (not included). |
|
124077 |
Screw Conveyor - - Available early Sept 2010 |
in Conveyors
|
1
|
|
800.00
|
|
St. Louis, MO |
| |
Screw Conveyor - - Available early Sept 2010 10" dia screw x 21.5' long - OAW 18" |
|
112896 |
Screw Conveyor - 6" dia. x 19'-2" long (NPSC shop made) |
in Conveyors
|
1
|
|
15,000.00
|
|
St. Louis, MO |
| |
Screw Conveyor - 6" dia. x 19'-2" long (NPSC shop made) With 3 HP shaft-mounted drive. Complete with CIP spray bar assembly and stainless steel cover. |
|
98463 |
Self contained filter/bag-dump station |
in Materials Handling and Storage Equipment
|
1
|
|
|
|
Memphis, TN |
| |
Self contained filter/bag-dump station 316SS |
|
124184 |
Silo - 4,450 cu. ft. capacity |
in Materials Handling and Storage Equipment
|
1
|
|
25,000.00
|
F* |
St. Louis, MO |
| |
Silo - 4,450 cu. ft. capacity Currently being used to store Wheat Gluten - available approx. 10/2010. |
|
124268 |
Single Track Conveyor off small bag line |
in Conveyors
|
1
|
|
|
|
St. Louis, MO |
| |
Single Track Conveyor off small bag line Single 7-1/2" LBP |
|
87164 |
Small Material Rack Five Level |
in Materials Handling and Storage Equipment
|
1
|
|
|
|
Wilmington, DE |
| |
Small Material Rack Five Level Small Material Rack, 5 level, 51" wide, 29 ½" deep, 8' tall |
|
123733 |
Ryson |
Spiral |
in Conveyors
|
1
|
|
40,000.00
|
|
St. Louis, MO |
| |
Spiral Conveyor Ryson-like Spiral Conveyor |
|
109014 |
Machine & Process De |
none |
in Materials Handling and Storage Equipment
|
1
|
|
15,000.00
|
|
St. Louis, MO |
| |
Stainless Steel Bin, 86 cu. ft. capacity 8' long screw conveyor for bin bottom to a 12" x 8' long stainless steel discharge screw conveyor for final bin exit. Removal scheduled for July, 2009. |
|
93036 |
TopTier |
|
in Materials Handling and Storage Equipment
|
1
|
|
36,500.00
|
F* |
St. Louis, MO |
| |
Top Tier, Unitizer with Concurrent Stretchwrapper (Slip Sheet) Case rates to 50 CPM depending on model and layer patterns
Case size from 6" to 24" in either
dimension - 6" to 48" optional
Layer weights of 300 pounds - optional to 1000 lbs
|
|
119448 |
Toyota |
7BWS13 |
in Materials Handling and Storage Equipment
|
1
|
|
6,000.00
|
F* |
St. Louis, MO |
| |
Toyota Walkie Stacker, 2500 lb. Capacity With 24VDC Type E Battery, #195AH and 120VAC Charger Pack |
|
91574 |
Tri-Star Packaging |
|
in Conveyors
|
1
|
|
4,500.00
|
|
St. Louis, MO |
| |
Tri-Star Packaging Conveyor, 12" wide x 6' long With 1/2 HP Reliance Motor, 1725 RPM, 208-230/460 volt |
|
93120 |
Triple S Dynamics |
|
in Conveyors
|
1
|
|
55,000.00
|
|
St. Louis, MO |
| |
Triple S Dynamics, Conveyor Triple S Dynamics Vibratory Conveyors, Slipstick horizontal motion |
|
93035 |
Triple S Dynamics |
HDC-8-2-5-LH |
in Conveyors
|
1
|
|
16,500.00
|
|
St. Louis, MO |
| |
Triple S, Conveyor Slipstick horizontal Differential conveyor, 3A Construction, sized to run Bulk Powder, with a density of 35lbs per cubic foot at a rate of 8,000 to 14,000 Lbs per hour Model HDC-8-2-5-LH |
|
121179 |
Used 55 gal Drum lifters( 7) |
in Lifters and Hoists
|
7
|
|
|
|
LeMans, Pays de la Loir |
| |
Used 55 gal Drum lifters( 7) manufacturer - Ch. Lebre, max weight capacity - 300 kgs, ages 1994 to 2004. lifts and tilts drum. Model - Rotofut, model Rf350M00, These items located in France. |
|
104859 |
Big Joe |
2018-r7 |
in Lifters and Hoists
|
1
|
|
|
F* |
Circleville, OH |
| |
Used Big Joe Pallet Stacker Model 2018-R7 Used Big Joe Pallet Stacker Model 2018-R7, serial #86505, 2000 lb capacity, straddle stacker, 7 ft lift, 18" load center, non telescopic |
|
103464 |
Rico |
|
in Forklifts and Accessories
|
5
|
|
|
|
Fort Madison, IA |
| |
Used BRP Rico Heavy Duty Rider Straddle Truck Type EE Used BRP Rico Heavy Duty Rider Straddle Truck Type EE, 3000 lb capacity, 55" lift with sideshift, 24 volts, |
|
112771 |
Crown |
WAV50-84 |
in Materials Handling and Storage Equipment
|
1
|
|
4,500.00
|
F* |
Bristol, England |
| |
Used Crown Wave Work Assist Vehicle Used Crown Wave Work Assist Vehicle, model WAV50-84, serial 843242JMH1235-C, electric, purchased in 2005, total weight 500kg, 24 volts, extended height about 3 Meters, this item can be used to commonly used to pick inventory or to chage lamps from light fixtures or any high level work |
|
120876 |
Used Dynaric Automatic Strapper model AM-80-A |
in Materials Handling and Storage Equipment
|
1
|
|
|
F* |
Parlin, NJ |
| |
Used Dynaric Automatic Strapper model AM-80-A Used Dynaric Automatic Strapper model AM-80-A, uses polystrapping material, serial- 06394940, works good |
|
104860 |
Presto |
C74-15LC |
in Lifters and Hoists
|
1
|
|
|
F* |
Circleville, OH |
| |
Used Presto Pallet Stacker Model C74-15LC Used Presto Pallet Stacker Model C74-15LC, serial #7998-500, 1000 lb capacity, straddle stacker, 74" lift, 15" load center |
|
124669 |
Used racking |
in Warehouse Racking
|
14
|
|
|
|
Louisville, KY |
| |
Used racking Used racking, measuring 3 ft deep x 8' s x 10'h, 3 shelves, 14 sections, wire decking |
|
119538 |
Toyota |
627fdf25 |
in Forklifts and Accessories
|
1
|
|
|
F* |
LeMans, Alsace |
| |
Used Toyota Fork Trucks ( 6 ) ONE LOT OF 6 USED FORK TRUCKS - fork truck #1- 3 ton Model 627FDF30, serial# 14444, age 2007, heated cab
Fork Truck #2 - 2.5 ton, rotary head, Model 627FDF25, serial# 20675, with cab, age 2007, Fork trucks #3,4,5,6 -2.5 ton Model 627FDF25, serial# 20864,
1 - 2.5 ton with rotary forks |
|
111607 |
Used Van Beek Hoppper |
in Materials Handling and Storage Equipment
|
1
|
|
|
|
Antwerp, Vlaams Gewest |
| |
Used Van Beek Hoppper Used Van Beek Hoppper, epoxy lined, age 2003, dimensions 1210mm L x 1746mm W x 2350 mm H |
|
124048 |
Versa |
n/a |
in Conveyors
|
1
|
|
|
|
St. Louis, MO |
| |
Versa Incline Belt Conveyor - Available early Sept 2010 24" Overall belt width - Overall height is 7.5' |
| Displaying 1-100 of 110 Page 1 2 |
ALL CATEGORIES 
View 
when document attached
Group Listings into sub-categories 
Forklifts