| Item ID |
Short Description |
Product Type / Details |
#
|
Price |
Note |
Location |
| Make |
Model |
| |
|
$ |
|
 |
118799 |
Armstrong Engineerin |
Size "G" H.D. Vaporizer |
in Heat Exchangers
|
1
|
|
|
 |
Beaumont, TX |
| |
Armstrong Vertical Bayonet Vaporizer Size "G"- Lethal Service Vaporizer was used in chlorine service to vaporize liquid chlorine at 90 psig. The tube bundle is removable in field and a spare tube bundle can be installed quickly. Unlimited turndown with steam entering the bottom protects against freezing. Tubes are free to expand or contract since only secured at bottom. The tubes are standpipe double tubes. |
|
119181 |
Birmingham Goslin |
|
in Heat Exchangers
|
2
|
|
|
F* |
Beaumont, TX |
| |
Drum roller heat exchangers-Steam Heated 60" Diameter x 144" long surface area |
|
119608 |
Hammco Inc |
HAC0824T07 |
in Heat Exchangers
|
1
|
|
|
F* |
Houston, TX |
| |
Forced Draft Air Fin Fan Cooler (Baton Rouge, La) See the extended description below
. |
|
122439 |
Ohmstede |
748941 |
in Heat Exchangers
|
1
|
|
|
|
Beaumont, TX |
| |
Hast. C276 Heat Exchger/Tube Reactor 147 tubes (2"OD x 0.083 wall x 7-Ft long) The top channel has an ANSI 150lb 2" flange in the center, an ANSI 150lb 4" nozzle on the side of the top head and one offset ANSI 150lb 1-1/2". The bottom channel has an ANSI 150lb 2" center flange, a 2" and 4" nozzle on the side, nreacted vapors exit through a 4" nozzle on the side. A screen and support grids are installed in the bottom head with a hinged bottom flange. |
|
122434 |
Ohmstede |
648839 |
in Heat Exchangers
|
1
|
|
|
|
Beaumont, TX |
| |
Hast. C276 Heat Exchger/Tube Reactor 450 tubes (2"OD x 0.083 wall x 7-Ft long) Cooling tower water enters the shell through a 8" nozzle near the topside. A 1-1/2" nozzle near the topside has a R/V attached. A 10" nozzle on the top head is used for vapor entering the heat exchanger. Liquid exits the bottom head through a center 2" nozzle and vapors exit through a 6" nozzle on the side of the bottom head. |
|
121307 |
Ohmstede |
748034 |
in Heat Exchangers
|
1
|
|
|
|
Beaumont, TX |
| |
Hast. C276 Heat Exchger/Tube Reactor 645 tubes (2"OD x 0.083 wall x 7-Ft long) New tube bundle in 2008, new shell in 1997, shell refurbished in 2008, and new top head in 2007.
Tube bundle wt.=18,000lb, |
|
98574 |
Croll-Reynolds |
|
in Heat Exchangers
|
1
|
|
|
|
Washington, WV |
| |
Hastelloy C Heat Exchanger MFG by Croll-Reynolds in 1993; 2" suction; 2" discharge; 2x2 ejector y & z stages; steam chest 150 psi @450 deg F; body 15FV @ 450 deg F |
|
121149 |
Ohmstede |
Dwg 848075 |
in Heat Exchangers
|
1
|
|
|
|
Beaumont, TX |
| |
Hastelloy C276 Double T/S & Ni Bonnets -84 tubes(1"OD x 0.065 wall x 8 Ft long) Process tubesheets Hastelloy C276, Shell Tubesheets carbon steel,Incoloy 800H bellows, 1-1/4" pitch, Surface area 169 Sq Ft., National Board Certified, TEMA Size 15 x 96 TEMA Type E. Nickel 200 Bonnets. |
|
87536 |
Heat Exchanger; type B-300; 6 inch shell steam U-tube |
in Heat Exchangers
|
1
|
|
|
|
Richmond, VA |
| |
Heat Exchanger; type B-300; 6 inch shell steam U-tube Tube side 5000 psig; Shell side 400 psig steam; 400 F max |
|
95217 |
RAS Process Equipmen |
|
in Heat Exchangers
|
1
|
|
87,000.00
|
F* |
Deepwater, NJ |
| |
New Unused Monel Heat Exchanger 560 sq ft New Unused Monel Heat Exchanger 560 sq ft with incoloy tubes, ASME code, Tema size 23-144, type BEP, classB, design Pressure - 75 psi, Design Temperature - 300F, year 2006, serial # 05266500, made by RAS Process Engineering, length 146.25 inches x 25.5 inch diameter |
|
87705 |
Mitternight Boiler W |
SN3233 |
in Heat Exchangers
|
1
|
|
|
F* |
Deepwater, NJ |
| |
New, Unused Inconel 600 Heat Exchanger Heat Exchanger; Manufacturer: Mitternight Boiler Works
Capacity 265 Gal, Length 24'2", diameter 14" Inconel 600 tubes/bonnet/shell. Capacity 265 gal, length 24'2", Dia 14", RT1 stamping, Shell 200FV@650F Tube 200/FV@900F , National Board# 1975 |
|
87943 |
Unknown |
Type 15-BFG |
in Heat Exchangers
|
1
|
|
|
F* |
Pass Christian, MS |
| |
Plate Heat Exchanger Plate Heat Exchanger
LCEC# D81349 |
|
87577 |
Spiral |
in Heat Exchangers
|
1
|
|
|
|
Washington, WV |
| |
Spiral Carbon Steel; 150psi Shell and Tube; Tube length 4ft; spiral outer thickness .25" x 48" wide; 212 deg.F shell and tube; |
|
119990 |
Stainless Steel Tubes - 95 tubes TP310SS 0.75"OD x 0.065 Wall 28Ft long |
in Heat Exchangers
|
95
|
|
|
|
Beaumont, TX |
| |
Stainless Steel Tubes - 95 tubes TP310SS 0.75"OD x 0.065 Wall 28Ft long 1300 # of 310 SS |
 |
110844 |
Alfa Laval |
|
in Heat Exchangers
|
1
|
|
|
|
Manati, PR |
| |
URGENT Wanted: Spiral Heat Exchanger - 120 sq ft Vertical spiral heat exchanger meeting the following specs: Alfa Laval, area: 120 sq ft., dimensions: 4 ft long x 21 inch diameter. Mat'l of construction = Carbon Steel. MAWP: 150 psi, Max. temp: 350 deg. F |
|
109111 |
Wanted - Heat Exchanger |
in Heat Exchangers
|
1
|
|
|
|
Wilmington, DE |
| |
Wanted - Heat Exchanger Wanted - Heat Exchanger - 200,000 BTU/hr heat transfer using -10C glycol as heat transfer fluid Shell & tube or double pipe, 1-1/2” to 2” inlet/outlet all around,
Material Of Construction: Stainless Steel process side
Dimensions Required: -na-
Quantity: 1
|
|
111390 |
Wanted - Heat exchanger (Condenser) Shell and Tube |
in Heat Exchangers
|
1
|
|
|
|
Wilmington, DE |
| |
Wanted - Heat exchanger (Condenser) Shell and Tube Wanted - Heat exchanger (Condenser) Shell and Tube, heat Transfer Area: 500ft^2, MOC: Tubes, Hastelloy C-276; shell, stainless steel, Process: Vapor in Tube, Cooling: Water in shell |
|
111392 |
Wanted - Heat exchanger Shell and Tube |
in Heat Exchangers
|
1
|
|
|
|
Wilmington, DE |
| |
Wanted - Heat exchanger Shell and Tube Wanted - Heat exchanger Shell and Tube; Equipment Type: Shell and Tube; Heat Transfer Area: 150 ft^2; MOC: Tubes, Hastelloy C-278; Shell, stainless steel or carbon; Process Vapor in Tube; Cooling: Hot Oil in shell
|
|
121888 |
Wanted: 25 sq.ft. Shell & Tube Heat Exchanger |
in Heat Exchangers
|
1
|
|
|
F* |
Kinston, NC |
| |
Wanted: 25 sq.ft. Shell & Tube Heat Exchanger 25 sq.ft. Shell & Tube Heat Exchanger similar to:
Process conditions: Fluid cold shellside = water, fluid hot tubeside = steam, shellside flow rate in 1000 lb/hr = 20.0, tubeside flow rate = .89, tubecount = 38, passes = 1, tube OD .75 inch, tube length = 3.5 ft, pitch ratio = 1.25. Shell ID = 1- inch, Shell 486.67 Btu/ft2-hr-F, Tube 1056.32 Btu/ft2-hr-F, EMTD = 162.4 DegF, |
|
119996 |
Zirconium - 470 tubes only 3/4"OD x 0.065 wall x 16-ft long |
in Heat Exchangers
|
470
|
|
|
F* |
Beaumont, TX |
| |
Zirconium - 470 tubes only 3/4"OD x 0.065 wall x 16-ft long 2900 # of Zirconium |
|
122401 |
Wah Chang |
|
in Heat Exchangers
|
1
|
|
|
|
Beaumont, TX |
| |
Zirconium Grade 702 Tubes only (2 tubes 1"ODx0.065 wallx16-ft 1/8" long) One tube is smooth and has very light mill markings. The other tube has scratches running along its length and no mill markings |
|
122400 |
Wah Chang |
|
in Heat Exchangers
|
22
|
|
|
|
Beaumont, TX |
| |
Zirconium Grade 702 Tubes only (23 tubes 1"ODx0.065 wallx12-ft 1/8" long) Tubes were covered in individual plastic sleeves which is brittle from storage. There are also 4 tapered zirconium tapered plugs in a cloth bag that will be shipped with the tubes. |
|
122399 |
Wah Chang |
|
in Heat Exchangers
|
23
|
|
|
|
Beaumont, TX |
|
118788 |
Bignier Schmid-Laure |
BSL 110 005 (MNC-4148-W) |
in Heat Exchangers
|
3
|
|
|
|
Beaumont, TX |
| |
Zirconium Vert Shell & Tube Exchanger & Heads (40 tubes 1"ODx0.065"W x 16-ft) Both Zirconium tubesheets are 2" thick by 13" Dia., Shell is carbon steel with carbon steel tubesheets, test shroud is carbon steel and seals the open gap between the double sheets. |
|
118794 |
Zirconium Vert Shell & tube Exchanger (465 tubes- 3/4"OD x 0.065"W x 16ft long) |
in Heat Exchangers
|
3
|
|
|
F* |
Beaumont, TX |
| |
Zirconium Vert Shell & tube Exchanger (465 tubes- 3/4"OD x 0.065"W x 16ft long) Design Conditions
Tube side 75-psig @ 275F & FV (corrosion allowance =1/16")
Shell side 100-psig @ 250F (corrosion allowance =1/8")
Shell RT-4 spot x-ray.
Top head weight = 300lb Bottom head =325 Shell= 6150
Zirc tubes are rolled into tubesheets to minimize stress cracking - precision rolling procedure used to prevent inducing excessive rolling stresses. |
|
120675 |
Zirconium Vert Shell & tube Exchanger (470 tubes- 1"OD x 0.065"W x 12- ft long) |
in Heat Exchangers
|
3
|
|
|
|
Beaumont, TX |
| |
Zirconium Vert Shell & tube Exchanger (470 tubes- 1"OD x 0.065"W x 12- ft long) Design Conditions
Tube side 75-psig @ 275F & FV (corrosion allowance =1/16")
Shell side 100-psig @ 250F (corrosion allowance =1/8")
RT-4 spot x-ray. Condenser can be inverted to extend tube life.
Zirc tubes are rolled into tubesheets to minimize stress cracking - precision rolling procedure used to prevent inducing excessive rolling stresses.
top Bonnet = 525-lb Bottom Bonnet = 425-lb Shell = 7,375-lb |
ALL CATEGORIES 
View 
when document attached
Group Listings into sub-categories 
Shell & Tube Heat Exchangers