 |
| Item ID |
Short Description |
Product Type / Details |
#
|
Price |
Note |
Location |
| Make |
Model |
| |
|
$ |
|
 |
93222 |
Acrison |
BDF-4-R/4 & R3 |
in Feeders
|
1
|
|
52,000.00
|
 F* |
St. Louis, MO |
| |
Acrison, Feeder Auger, Agitator Feeders Ac Drive, Each Auger/Agitator Utilizes Individual, Heavy Duty Drives Which Normally Operate Between 0.5 To 5 Rpm Depending On Specifics Of Product(S) Being Handled. The Motors Are Constant Speed (Ac), Totally Enclosed, And Require 230/460/3/60 Input As Standard. No Motor Starters Included. Conditioning Auger Motor Is 3 Hp. Hp Rating May Change Based On Engineering Review. The Bin Discharger Feeder Incorporates A Square Inlet Flange (48" X 48" Id) For Direct Attachment To A Storage Bin, Hopper Or Silo. Flexible Connections Are Not Required On Either Inlet Or Outlet. Surfaces Which Contact Product Will Be Constructed Of Mild Steel. The Metering Auger And Discharge Cylinder Are Constructed Of 304 Stainless Steel. The Metering Auger Is Solid Flight And Seal Welded. It Includes A Downspout Mounted End Bearing For Support. The Dimension From The Centerline Of The Inlet Of The Bdf To The Centerline Of The Outlet Of The Downspout Is 3'-10" (Length May Change Based On Engineering Review) Seal Housing (Internal Portion) Is Constructed Of 304 Stainless Steel. All Internal Welds Are Continous And Ground Smooth. The Feeder Is Totall Rugged And Virtually Silent In Operation. The Feeder Includes White Neoprene Gasketing And Is Completely Dust Tight. All Non-Stainless Steel Surfaces Will Be Painted Non-Toxic, Usda /Fda Approved White Enamel. Feeder Downspout Included, Metering Auger Driven By A Variable Speed, Totally Enclosed Ac 7.5 Hp Motor, Suitable For Variable Frequency Drive. Hp Rating May Change Based On Engineering Review
One (1) Standard Access Door In Feeder Body To Be Bolted, Hinged On Top And Gasketed, With Handle |
|
90836 |
Amfec |
610 |
in Feeders
|
1
|
|
5,000.00
|
|
St. Louis, MO |
| |
Amfec Horizontal Screw Loader - Ribbon type agitator for leveling of product.
- Agitator is driven by 1 HP motor
- Auger is driven by 3 HP motor
- 60 HZ, 4 amps
|
|
121241 |
Delta T Systems |
SF5000 |
in Feeders
|
1
|
|
20,000.00
|
|
St. Louis, MO |
| |
Delta Systems Cross Feeder belt width 52", total length ~ 19', discharge to the left hand side, servo driven |
|
95441 |
Eriez |
36C & HS26 |
in Feeders
|
4
|
|
10,250.00
|
F* |
St. Louis, MO |
| |
Eriez Vibratory Feeders - Pedal Control On/Off Capability Designed for feeding tablet type products
Multiple feeders feed from a 4.5 cu. ft. hopper. The first feeder is a model 36C that feeds to a HS26 which feeds to another HS26. Drawing attached. |
|
93133 |
Eriez |
HS 36 |
in Feeders
|
1
|
|
3,000.00
|
F* |
St. Louis, MO |
| |
Eriez, Vibratory Feed Hopper Eriez Vibratory FeederUsed to feed Chips, Nuts and other Small Items, Model HS 36 |
|
93530 |
K-Tron |
K2MLS100 |
in Feeders
|
1
|
|
7,000.00
|
F* |
St. Louis, MO |
| |
K-Tron Loss-In-Weight Feeder Rate: 450 pph - scale range 900 kw - 1.1 kw motor. With Agitator, 1 HP, 1725 RPM. |
|
100954 |
K-Tron |
KZMCT35DR |
in Feeders
|
1
|
|
10,000.00
|
|
St. Louis, MO |
| |
K-Tron Loss-in-Weight Stainless Twin Screw Batcher Electropolished 300 series stainless steel contact surfaces, 8.5 cu ft asymmetrical hopper w/auto refill lid w/inlet & 6" OD vent with filter sock. Used with powder material, bulk density: 32-38 lbs/cu ft, feed rate: 30-45 CFH, motor is TENV. Fixed speed arch breaker & control - flexible connections for 6" OD inlet and 4.5" OD discharge. NEMA 4 speed control module mounted on machine, KSU operator interface, Modbus/TCP control interface. Unit mounted on mild steel painted frame. |
|
94919 |
K-Tron |
K2MLT35DR |
in Feeders
|
1
|
|
15,000.00
|
|
St. Louis, MO |
| |
K-Tron Loss-in-Weight Stainless Twin Screw Batcher Electropolished 300 series stainless steel contact surfaces, 8.5 cu ft asymmetrical hopper w/auto refill lid w/inlet & 6" OD vent with filter sock. Used with powder material, bulk density: 32-38 lbs/cu ft, feed rate: 30-45 CFH, motor is TENV. Fixed speed arch breaker & control - flexible connections for 6" OD inlet and 4.5" OD discharge. NEMA 4 speed Smart Control Module mounted on machine, KSU operator interface, Modbus/TCP control interface. Unit mounted on mild steel painted frame. |
|
122407 |
K-Tron |
SW600 |
in Feeders
|
1
|
|
10,000.00
|
|
St. Louis, MO |
| |
K-Tron Weigh Belt Feeder All Stainless Steel Construction with stainless steel diverter and stainless steel bottom hopper. Missing one side panel. Controller: KSA w/SCM included. Material: Mixed Meal - Bulk Density: 25-35 pcf - Feed Rate: 1000 ppm. Electrical Class TENV (general purpose areas only). Material Temp: 70-90 degrees - Partical Size: 16-20 mesh - Characteristics: Free-Flowing. |
|
113604 |
Mac |
MD75 |
in Feeders
|
1
|
|
4,500.00
|
F* |
St. Louis, MO |
| |
Mac Rotary Airlock 304 Stainless Steel housing and end plated - TS4 seal assembly - outboard sealed bearings - 304 stainless steel rotor - 8-vane, closed end rotor with fixed relieved 1/8" land rotor tips - Class 1 clearance - end plates tapped with plug for cavity air purge - end plate air purge kit - 12" inlet - Drive No. 56 consisting of 1 HP 230/460/3/60 TEFC motor/reducer, 12 RPM output. |
|
122414 |
Mac |
AML 350 2 |
in Feeders
|
1
|
|
|
|
St. Louis, MO |
| |
MAC Rotary Valve Serial # 34146 |
|
122402 |
Mac |
SEA300 |
in Feeders
|
1
|
|
3,500.00
|
|
St. Louis, MO |
| |
MAC Rotary Valve Offset Discharge - Round inlet and outlet - 16" dia. - Some stainless parts. |
|
94921 |
Mac |
MD20 |
in Feeders
|
1
|
|
3,000.00
|
F* |
St. Louis, MO |
| |
MAC Rotary Valve, Model MD20 TS4 seal assembly. Outboard sealed bearings - 8-vane open end rotor with fixed relived 1/8" land rotor tips - CG120 rotor weld finish. With 3/4 HP, TEFC 56C frame motor with Dodge right angle reducer, 18 RPM |
|
102733 |
Mac |
MD20 |
in Feeders
|
1
|
|
3,000.00
|
|
St. Louis, MO |
| |
Mac Rotary Valve, Model MD20 TS4 seal assembly. Outboard sealed bearings - 8-vane open end rotor with fixed relieved 1/8" land rotor tips - reduced volume rotor CG120. With 3/4 HP TENV 56C frame washdown duty motor and right angle reducer, 18 RPM. Blow thru adapter w/legs, 304 S/S, CG120 to 2" schedule 10 line size. With 6-1/2" round transition. |
|
102734 |
Mac |
MD20 |
in Feeders
|
1
|
|
3,000.00
|
|
St. Louis, MO |
| |
Mac Rotary Valve, Model MD20 TS4 seal assembly. Outboard sealed bearings - 8-vane open end rotor with fixed relieved 1/8" land rotor tips - reduced volume rotor CG120. With 3/4 HP TENV 56C frame washdown duty motor and right angle reducer, 18 RPM. Blow thru adapter w/legs, 304 ss, CG120 to 2" schedule 10 line size. |
|
93244 |
Quadro Engineering |
XC3 |
in Feeders
|
1
|
|
9,500.00
|
F* |
St. Louis, MO |
| |
Quadro, Y-Tron Disperser High capacity, single pass dispersion of powders into liquids, 80 gal min, 230/460V Typical applications milk powders, whey powders, protein powders, gums, cocoa, ice cream mix, antacids |
|
91844 |
Rotolok |
HD14SRV0A |
in Feeders
|
1
|
|
300.00
|
|
St. Louis, MO |
|
91846 |
Rotolok |
14RVSCMA1 |
in Feeders
|
1
|
|
300.00
|
|
St. Louis, MO |
|
91847 |
Rotolok |
35RVSCMA13 |
in Feeders
|
1
|
|
400.00
|
|
St. Louis, MO |
|
91848 |
Rotolok |
35RVSCMA13 |
in Feeders
|
1
|
|
400.00
|
|
St. Louis, MO |
|
95296 |
Gericke |
GAC 232 |
in Feeders
|
1
|
|
28,500.00
|
F* |
St. Louis, MO |
| |
Universal Volumetric Screw Feeder Dosing tool and Homogenizer are arranged concentric and work with different numbers of revolutions. Form and arrangement of the homogenizer make a dual function possible: perfect supply of the bulk material into the dosing tool during and simultaneous homogenizing effect
|
|
111603 |
Brabender |
DDW-ST1504/TSR200-2500 |
in Feeders
|
1
|
|
|
F* |
Antwerp, Vlaams Gewest |
| |
Used Brabender Loss-in-weight Feeder Brabender Loss-in-weight Feeder - Model DDW-ST1504/TSR200-2500, serial# 0303735/2429, capacity 4 to 10 tons/hr, age 2003, |
|
111605 |
Brabender |
TSR200 |
in Feeders
|
1
|
|
|
|
Antwerp, Vlaams Gewest |
| |
Used Brabender Loss-in-weight Feeder Brabender Loss-in-weight Feeder - Model TSR200, age 2003, |
 |
110177 |
Wanted - Loss-in-weight Feeder |
in Feeders
|
1
|
|
|
|
Wilmington, DE |
| |
Wanted - Loss-in-weight Feeder Wanted - Loss-in-weight Feeder - Capacity: 600 lbs/hr Feedrate
Variable density of 8-10 lbs/cuft
(volumetric flowrate varies up to 75 cuft/hr)
Material Of Construction: Stainless steel
Quantity: one
|
|
|
ALL CATEGORIES 
View 
when document attached
Group Listings into sub-categories 
Auger Feeders