 |
| Item ID |
Short Description |
Product Type / Details |
#
|
Price |
Note |
Location |
| Make |
Model |
| |
|
$ |
|
 |
120052 |
Breddo Likwifier |
LORWW-200 |
in Blenders
|
1
|
|
60,000.00
|
|
St. Louis, MO |
| |
200 gal Breddo Likwifier Brand new Caravan Likwifier. Never used.
D 528419-1, Sterling motor serial number C50530508 |
|
98576 |
SWECO |
M45L |
in Mills
|
2
|
|
|
|
Wilmington, DE |
| |
4' diameter Sweco Grinding Mill comes with Alumina Oxide Grinding Media |
|
98577 |
SWECO |
CM60L |
in Mills
|
1
|
|
|
F* |
Wilmington, DE |
| |
5' diameter sweco grinding mill Comes with aluminum oxide grinding media |
|
98299 |
American Pulverizer |
TRS (64x40) |
in Mills
|
1
|
|
|
F* |
Orange, TX |
| |
American Pulverizer Shredder American Pulverizer Shredder (5'4" long by 3'4" diameter) |
|
91259 |
Canbar |
4848 |
in Blenders
|
1
|
|
2,500.00
|
 F* |
St. Louis, MO |
| |
Canbar Rotary Drum Coater, 1500 lb. capacity Access door has 12 x 12 opening. With 5 HP motor, 1725 RPM, 440 volt, 3 phase - and Radicon Reducer, ratio 20-1. RPM range on drum is 2 to 18 RPM. |
|
121241 |
Delta T Systems |
SF5000 |
in Feeders
|
1
|
|
20,000.00
|
|
St. Louis, MO |
| |
Delta Systems Cross Feeder belt width 52", total length ~ 19', discharge to the left hand side, servo driven |
|
93187 |
Demaco |
MX2000 |
in Blenders
|
1
|
|
22,500.00
|
F* |
St. Louis, MO |
| |
Demaco, Dough Mixer Dough Mixer, Model XX-24S, 1988, MX2000, 2000 lbs/hr |
|
120525 |
Donaldson Torit Dust Collector / vacuum system, Model TD-573 |
in Dust Collectors
|
1
|
|
|
|
Richmond, VA |
| |
Donaldson Torit Dust Collector / vacuum system, Model TD-573 Torit MODEL TD-573, 800 ICFM, 3600 RPM MTR, 480VAC, 25HP PURCHASED IN NOV 1999, RATED -220 IN WC,WITH SILENCER |
|
95441 |
Eriez |
36C & HS26 |
in Feeders
|
4
|
|
10,250.00
|
F* |
St. Louis, MO |
| |
Eriez Vibratory Feeders - Pedal Control On/Off Capability Designed for feeding tablet type products
Multiple feeders feed from a 4.5 cu. ft. hopper. The first feeder is a model 36C that feeds to a HS26 which feeds to another HS26. Drawing attached. |
|
93133 |
Eriez |
HS 36 |
in Feeders
|
1
|
|
3,000.00
|
F* |
St. Louis, MO |
| |
Eriez, Vibratory Feed Hopper Eriez Vibratory FeederUsed to feed Chips, Nuts and other Small Items, Model HS 36 |
|
122407 |
K-Tron |
SW600 |
in Feeders
|
1
|
|
10,000.00
|
|
St. Louis, MO |
| |
K-Tron Weigh Belt Feeder All Stainless Steel Construction with stainless steel diverter and stainless steel bottom hopper. Missing one side panel. Controller: KSA w/SCM included. Material: Mixed Meal - Bulk Density: 25-35 pcf - Feed Rate: 1000 ppm. Electrical Class TENV (general purpose areas only). Material Temp: 70-90 degrees - Partical Size: 16-20 mesh - Characteristics: Free-Flowing. |
|
96424 |
Lightnin |
14S1 |
in Blenders
|
1
|
|
9,000.00
|
F* |
St. Louis, MO |
| |
Lightnin Series 10 Mixer Material of in-tank mixer parts is 316 stainless steel. Impeller Data: Type A510E, 3 blades, 45 RPM. |
|
94922 |
Mac |
36AVR-STY3-CG |
in Dust Collectors
|
1
|
|
5,000.00
|
F* |
St. Louis, MO |
| |
Mac Filter Receiver with Access Platform, Model 36AVR Air-to-cloth ratio 6.9:1 - Filter stressed for 17" Hg - 304 stainless steel construction. Includes clean air plenum. Manifold and air requires 7.5 SCFM @ 90-100 psi.30 sq-ft of Polyetser filter media, bottom loaded, 304 S/S cages, clock-wise stainless steel pneumatic receiver section, 2" schedule 10 line size. |
|
102737 |
Mac |
36AVR7-STY3-CG |
in Dust Collectors
|
1
|
|
5,000.00
|
F* |
St. Louis, MO |
| |
Mac Filter Receiver, Model 36AVR7-STY3-CG Air-to-cloth ratio 6.9:1 - Filter stressed for 17" Hg - 304 stainless steel construction. Includes clean air plenum. Manifold and air requires 7.5 SCFM @ 90-100 psi. 30 sq-ft of Polyester filter media, bottom loaded, 304 S/S cages, clock-wise stainless steel pneumatic receiver section, 2" schedule 10 line size. |
|
113604 |
Mac |
MD75 |
in Feeders
|
1
|
|
4,500.00
|
F* |
St. Louis, MO |
| |
Mac Rotary Airlock 304 Stainless Steel housing and end plated - TS4 seal assembly - outboard sealed bearings - 304 stainless steel rotor - 8-vane, closed end rotor with fixed relieved 1/8" land rotor tips - Class 1 clearance - end plates tapped with plug for cavity air purge - end plate air purge kit - 12" inlet - Drive No. 56 consisting of 1 HP 230/460/3/60 TEFC motor/reducer, 12 RPM output. |
|
122414 |
Mac |
AML 350 2 |
in Feeders
|
1
|
|
|
|
St. Louis, MO |
| |
MAC Rotary Valve Serial # 34146 |
|
122402 |
Mac |
SEA300 |
in Feeders
|
1
|
|
3,500.00
|
|
St. Louis, MO |
| |
MAC Rotary Valve Offset Discharge - Round inlet and outlet - 16" dia. - Some stainless parts. |
|
102733 |
Mac |
MD20 |
in Feeders
|
1
|
|
3,000.00
|
|
St. Louis, MO |
| |
Mac Rotary Valve, Model MD20 TS4 seal assembly. Outboard sealed bearings - 8-vane open end rotor with fixed relieved 1/8" land rotor tips - reduced volume rotor CG120. With 3/4 HP TENV 56C frame washdown duty motor and right angle reducer, 18 RPM. Blow thru adapter w/legs, 304 S/S, CG120 to 2" schedule 10 line size. With 6-1/2" round transition. |
|
102734 |
Mac |
MD20 |
in Feeders
|
1
|
|
3,000.00
|
|
St. Louis, MO |
| |
Mac Rotary Valve, Model MD20 TS4 seal assembly. Outboard sealed bearings - 8-vane open end rotor with fixed relieved 1/8" land rotor tips - reduced volume rotor CG120. With 3/4 HP TENV 56C frame washdown duty motor and right angle reducer, 18 RPM. Blow thru adapter w/legs, 304 ss, CG120 to 2" schedule 10 line size. |
|
94921 |
Mac |
MD20 |
in Feeders
|
1
|
|
3,000.00
|
F* |
St. Louis, MO |
| |
MAC Rotary Valve, Model MD20 TS4 seal assembly. Outboard sealed bearings - 8-vane open end rotor with fixed relived 1/8" land rotor tips - CG120 rotor weld finish. With 3/4 HP, TEFC 56C frame motor with Dodge right angle reducer, 18 RPM |
|
122406 |
Mac |
36AVR7 |
in Dust Collectors
|
1
|
|
12,000.00
|
F* |
St. Louis, MO |
| |
MAC Stainless Steel Dust Collector Serial # 81247-002-1 - Air-to-cloth ratio = 6.9:1 - 304 Stainless steel construction - Clockwise stainless steel pneumatic receiver section - 2" schedule 10 line size - Product discharge flanged to match MAC MD20 Airlock - Discharge 8" |
|
93244 |
Quadro Engineering |
XC3 |
in Feeders
|
1
|
|
9,500.00
|
F* |
St. Louis, MO |
| |
Quadro, Y-Tron Disperser High capacity, single pass dispersion of powders into liquids, 80 gal min, 230/460V Typical applications milk powders, whey powders, protein powders, gums, cocoa, ice cream mix, antacids |
|
103985 |
Retsch |
BB200 |
in Mills
|
1
|
|
18,250.00
|
F* |
Scotia, NY |
| |
RETSCH BB200 Tungston Jaws and Stainless Wear Plates |
|
91844 |
Rotolok |
HD14SRV0A |
in Feeders
|
1
|
|
300.00
|
|
St. Louis, MO |
|
91846 |
Rotolok |
14RVSCMA1 |
in Feeders
|
1
|
|
300.00
|
|
St. Louis, MO |
|
91847 |
Rotolok |
35RVSCMA13 |
in Feeders
|
1
|
|
400.00
|
|
St. Louis, MO |
|
91848 |
Rotolok |
35RVSCMA13 |
in Feeders
|
1
|
|
400.00
|
|
St. Louis, MO |
|
95296 |
Gericke |
GAC 232 |
in Feeders
|
1
|
|
28,500.00
|
F* |
St. Louis, MO |
| |
Universal Volumetric Screw Feeder Dosing tool and Homogenizer are arranged concentric and work with different numbers of revolutions. Form and arrangement of the homogenizer make a dual function possible: perfect supply of the bulk material into the dosing tool during and simultaneous homogenizing effect
|
|
111603 |
Brabender |
DDW-ST1504/TSR200-2500 |
in Feeders
|
1
|
|
|
F* |
Antwerp, Vlaams Gewest |
| |
Used Brabender Loss-in-weight Feeder Brabender Loss-in-weight Feeder - Model DDW-ST1504/TSR200-2500, serial# 0303735/2429, capacity 4 to 10 tons/hr, age 2003, |
|
111605 |
Brabender |
TSR200 |
in Feeders
|
1
|
|
|
|
Antwerp, Vlaams Gewest |
| |
Used Brabender Loss-in-weight Feeder Brabender Loss-in-weight Feeder - Model TSR200, age 2003, |
 |
110177 |
Wanted - Loss-in-weight Feeder |
in Feeders
|
1
|
|
|
|
Wilmington, DE |
| |
Wanted - Loss-in-weight Feeder Wanted - Loss-in-weight Feeder - Capacity: 600 lbs/hr Feedrate
Variable density of 8-10 lbs/cuft
(volumetric flowrate varies up to 75 cuft/hr)
Material Of Construction: Stainless steel
Quantity: one
|
|
|
ALL CATEGORIES 
View 
when document attached
Group Listings into sub-categories 
Blenders - Other